Antari M-4 User Manual download pdf (Page 5)

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space at each side of the machine and 5 meters for the output direction of the

machine.

Step 2: Fill the fluid tank with Antari fog fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine by connecting the power cord and turning the Neutrik

Powercon. Heat-up takes approximatly 5 minutes. Once the machine has reached operating

temperature, the LCD screen will display “Ready To Fog”. Now the machine is ready for

operation.

Control Panel Operation

The machine can be operated with the on-board LCD control panel.

Button

Function

[Menu]

Select from functions

[ ▲ / Timer]

To increase value or choose from options

To activate Timer Mode

[ ▼ / Volume]

To decrease value or choose from options

To active Volume Mode

[Stop]

To deactivate Timer/Volume function

Or to select and memorize the setting

ANTARI M-4

Ready to Fog

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Antari M-4 User Manual Page 5