User Manual
Antari Fog Cooler
Congratulations on the purchase of your new
ANTARI FOG COOLER
Introduction
Thank you for choosing the ANTARI Fog Cooler. You now own a rugged and powerful state-of-the-art
machine. Prior to use, we suggest that you carefully read all of the instructions. By following the
suggestions found in this user manual, you can look forward to the reliable and satisfactory
performance of your ANTARI Fog Cooler for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and safe
life for your fog cooler.
Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fog Cooler
Ideal operating temperature is 10 - 30 degrees Celsius.
After moving or transporting this unit, wait five minutes before operating.
Input fog must be clean. Contaminated fog may damage internal parts.
There must be a free air space of at least 15 cm (6 inches) between the fog cooler intake and the
fog machine output.
After interrupting operation, wait three minutes before starting again.
Keep this device dry.
For inside use only. Not designed for outside use.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to
determine that the unit is installed at the rated voltage.
Keep fog cooler upright. Do not tilt this device. Angle of inclination may not exceed 10 degrees.
Turn off or unplug when not in use.
This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the housing,
immediately unplug the unit and contact a service technician or your ANTARI dealer before using it
again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
For adult use only. Fog cooler must be installed out of the reach of children. Never leave the unit
running unattended.
Locate the fog cooler in a well-ventilated area. Never cover the unit’s vents. The fog cooler is best
installed 1 meter away from all objects.
Use only ANTARI FLR Fog Liquid.
If your ANTARI Fog Cooler fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material) and return it to your ANTARI dealer for
service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived
intact. Refer to the ”Features” section for information on what items are included with your model. If
any equipment is missing contact your ANTARI dealer immediately.
Before beginning initial setup of your ANTARI Fog Cooler, make sure that there is no evident damage
caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and
do not attempt to use it until after contacting your ANTARI dealer for assistance.
(32 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals